Cost Guide
How Much Does a Wood Fence Cost in North Texas?
A practical 2026 guide to cedar privacy fence pricing across North Texas — what drives cost, example project math, and how to get a realistic ballpark without rearranging your week.
Published by TrueSet Fence & Gate
The short answer
Fence Prices Vary — A Lot
There is no single “price per foot” for a wood privacy fence. Cost varies substantially based on the fence design and the conditions of your specific job. For planning, the examples below use assumed rates of $25, $40, and $55 per linear foot to show how footage changes a budget. These are illustrative inputs, not verified market averages or advertised TrueSet rates.
Important: These examples are not a TrueSet quote or a minimum and maximum price for your fence. Board-on-board, taller fencing, premium construction details, gates, difficult access, tear-out, staining, and unusual site conditions can increase cost. A final price requires the actual project scope, and the actual price can fall outside the examples.
What drives the price
The Biggest Cost Drivers
Understanding these factors is the difference between comparing real proposals and comparing numbers that look similar but aren't.
Total Linear Footage
Fence length is the single biggest driver of total cost — more footage means more posts, pickets, rails, concrete, and labor. Very small jobs may also carry a minimum mobilization or labor cost, so price-per-foot on a short run isn't always a clean comparison.
Fence Height
Most residential privacy fences are built at 6′ or 8′. An 8-foot fence generally requires more material and more labor than a 6-foot fence, so taller fencing tends to cost more per linear foot.
Side-by-Side vs. Board-on-Board
Side-by-side construction uses less material and is generally the more economical option. Board-on-board uses overlapping pickets — more material and more labor — but it provides greater privacy as wood naturally moves and shrinks over time. See our board-on-board vs. side-by-side guide. See our wood privacy fence page.
Cedar vs. Pressure-Treated Pine
Cedar is TrueSet's preferred premium wood-fence material — it's generally more dimensionally stable and well suited to North Texas conditions. Pressure-treated pine may still make sense where budget is the primary concern. Both are legitimate choices; the right one depends on your goals. See our cedar vs. pressure-treated pine guide.
Gates
Walk gates, double gates, larger openings, upgraded framing, and heavier hardware all affect project price. A wide double gate built to stay aligned costs more than a simple walk gate.
Existing Fence Removal
Demolition, haul-off, and disposal of an old fence add labor and disposal cost to the project. If you're replacing an existing fence, that work should be priced clearly as part of your scope. See our fence replacement page.
Staining
Staining is a separate investment that can improve appearance and help protect the wood. TrueSet's staining process normally requires at least two visits/days — the fence is pressure washed first and must dry sufficiently before stain is applied. We don't publish an exact staining rate on this guide, but it can be added to your project scope. See our fence staining & restoration. See our North Texas fence staining cost guide.
Site Conditions
Access, grade and slope, ground conditions, obstacles, existing structures, HOA requirements, and permit requirements all influence what a project actually takes. Difficult access or unusual terrain can add labor and time.
Want a Better Number Than a National Average?
TrueSet's calculator lets you choose your approximate fence footage, style and options, height, and gates and upgrades — then gives you a realistic ballpark before you schedule a traditional estimate.
Get My 2-Minute Fence EstimateExample project math
What the Example Rates Look Like in Dollars
Here are the assumed example rates applied to common fence lengths. This is simple multiplication — not a market survey or a quote. Not sure how much fence you have? See how to measure your yard for an estimate.
| Fence Length | At $25/LF | At $40/LF | At $55/LF |
|---|---|---|---|
| 100 LF | $2,500 | $4,000 | $5,500 |
| 150 LF | $3,750 | $6,000 | $8,250 |
| 200 LF | $5,000 | $8,000 | $11,000 |
| 250 LF | $6,250 | $10,000 | $13,750 |
Illustrative budget examples — not a TrueSet quote. Gates, removal, stain, height, board-on-board construction, site conditions, and other options can materially change these numbers.
Beyond price per foot
Why “Price Per Foot” Isn’t the Whole Story
Two 150-foot fences can cost very different amounts. Before you compare numbers, compare what's actually included.
This is exactly why TrueSet builds clear, defined proposals. You should know what you're paying for, what's included, and what's excluded — before the crew ever shows up. Not after.
Questions homeowners ask
Wood Fence Cost FAQ
How much does a 200-foot cedar fence cost in North Texas?+
At the illustrative rates of $25, $40, and $55 per linear foot used here, 200 feet would calculate to $5,000, $8,000, or $11,000. Those calculations are not a quoted range or verified market average. The actual number depends on height, construction style, gates, tear-out, site conditions, and the other factors on this page. A final price requires the actual project scope.
Is board-on-board more expensive than side-by-side?+
Yes, generally. Board-on-board uses overlapping pickets, which means additional material and labor compared to side-by-side construction. The trade-off is greater long-term privacy as the wood naturally moves and shrinks.
Is an 8-foot fence more expensive than a 6-foot fence?+
Yes, generally. An 8-foot fence requires more material and more labor than a 6-foot fence, so it tends to cost more per linear foot.
Does removing the old fence cost extra?+
Yes. Demolition, haul-off, and disposal of an existing fence add labor and disposal cost. That work should be included clearly in your written scope — not buried or assumed.
Does staining come with the fence?+
Stain and finish depend on the project scope you select. Pre-stained options and post-install staining can be added to your project, and either should be confirmed in your proposal. Staining is a separate investment from the fence build itself.
Can I get a fence price without having someone come to my house?+
Often, yes. TrueSet's online calculator gives you a realistic ballpark in about two minutes, and a contactless / no-visit estimate is available when the project allows it. start your estimate now.
Project planning note
Before Applying This Guide to Your Fence
The example rates on this page demonstrate budgeting math. They are not surveyed market averages, advertised TrueSet rates, or a final quote. Confirm materials, height, gates, removal, finishing, and access in the written proposal.
Keep exploring
Related Resources & Service Areas
- View All Fence Guides.
- Explore wood privacy fence installation.
- Replacing an old fence? See fence replacement.
- Protect the wood with fence staining & restoration.
- Browse all North Texas service areas.
- Fence pricing in Anna, McKinney, or Frisco.
See What Your Fence Could Cost
Get a realistic ballpark range in about two minutes. Choose your fence, enter a rough measurement, and we'll take it from there.